4750 ANN

Annealed 4750 is a nickel-iron super alloy that is known for its ability to operate under high mechanical stress and its good magnetic properties. This steel is used in products where high initial permeability, maximum permeability, and low core loss is required. This material is moderately resistant to corrosion. This soft magnetic alloy is popular in the aerospace, electrochemical, gas and oil, and telecommunication industries for applications that demand very low current holding magnets. 4750 steel is commonly used to produce transformer cores, highly efficient motors, shielding, and specialized electronic devices, such as LF power transducers, chokes, relay parts, solenoids & oscillators. (UNS N14080)

Common Applications

  • AerospaceAerospace
  • IndustrialIndustrial

Benefits

  • High Permeability
  • Magnetic Properties
  • Moderate Corrosion Resistance

Request a Quote

4750 ANN

We Stock 4750 ANN to the Following Specifications:

  • AMS-7718 EXC. HARDNESS
  • MIL-N-14411 COMP.3 CAP. OF
  • GE-S-SPEC-1
  • GE-S-SPEC-35

Chemical Makeup

ElementMinMax
Nickel, Ni-48
Chromium, Cr-0.1
Manganese, Mn-0.8
Silicon, Si-0.3
Carbon, C-0.05
Phosphorus, P-0.025
Sulfur, S--0.025

Cross-Fittings

Round

There are 23 sizes and conditions.

  • 3/16 - CG
  • 1/4 - CG
  • 5/16 - CG
  • 3/8 - CG
  • 7/16 - CG
  • 1/2 - CG
  • 5/8 - CG
  • 3/4 - CG
  • 13/16 - CG
  • 7/8 - CG
  • 1 - CG
  • 1-1/8 - CG
  • 1-1/4 - CG
  • 1-3/8 - CG
  • 1-1/2 - CG
  • 1-5/8 - CG
  • 1-3/4 - CG
  • 1-7/8 - CG
  • 2 - CG
  • 2-1/2 - CG
  • 3 - CG
  • 3-1/2 - CG
  • 4 - CG

Flat

There are no sizes and conditions for the flat cross-section.

Square

There are no sizes and conditions for the square cross-section.

Hex

There are no sizes and conditions for the hex cross-section.